Connecting A Sound Source/Audio Input; Connecting Ps/2 Devices; Connecting The Power Supply - Medion Akoya E4055 D Instruction Manual

Connecting a Sound Source/Audio Input

Diagram reference: R
This port is used to accommodate a connecting cable for external analogue audio sources
(i.e. stereo system, keyboard/synthesizer).
1. Connect the cable with the 3.5 mm stereo jack plug to the light-blue coloured
socket.

Connecting PS/2 Devices

Diagram reference: S
You can omit this step if you want to connect a USB mouse or keyboard.
1. Connect the mouse cable to the right, green PS/2 port.
2. Connect the keyboard to the left, blue PS/2 port.

Connecting the Power Supply

Diagram reference: N
Finally, connect the power supply to your PC and monitor.
1. Plug the main power cord into the power socket and connect it with the main cord
connection (N) of your PC.
Observe the following safety precautions:
Please note
Even with the power switch switched off some parts of the device receive
current. You must unplug the power plug from the socket, if you want to
interrupt the power supply to your PC or cut off your device from current
entirely.

The power socket must be in the vicinity of the PC and within reach of the power
cords. Do not stretch the power cords tightly to reach a power socket.

Only operate the PC on grounded plugs of the domestic power network.

Use only the supplied power cord.

To provide additional protection against electric shock, power surges, lightning strikes,
or other electrical damage to your PC, we recommend the use of a surge protector.

The power supply unit has an On/Off switch that can be used to power off the PC.
When the switch is Off (0) no power is being consumed.
First, read the following section to find out what you need to know in order to get started.
After Sales Support
Do not start your PC yet!
TEL: 1300 884 987 WEB Support: www.medion.com.au
17