Connecting a sound source/audio input
Diagram reference: F1, F2
This port is used to accommodate a connecting cable for external
analogue audio sources (i.e. stereo system, synthesizer).
1. Connect the cable with the 3.5 mm stereo jack plug to the
light-blue coloured socket (reference F1).
Optionally, you can connect a stereo Cinch cable
(position F2).
You will be able to connect digital audio sources according to
the version.
Diagram reference: G2
1. Connect a Cinch or an optical connection cable to the audio
input at Position G2.
2. Connect the other end of the cable to an audio device with a
corresponding digital output.
Connecting a microphone
Diagram reference: U
1. You can use the pink socket U to connect a microphone
with a 3.5 mm mono jack plug.
2. Position the microphone in such a way that it does not point
directly at the speakers. If you hear feedback, characterised
by loud whistling noises, reposition the microphone until the
sound stops.
16
Connecting