The Remote Control
Note
This wireless remote control set can only be used to
control the Power Cinema program on your PC. In
order for it to work, the following conditions must be
met:
- The PC must be booted up.
- The operating system must be fully loaded.
- The driver software must be installed*.
* All these conditions are met in the delivered state.
Inserting Batteries
Open the battery compartment carefully. Insert two batteries
(type: AAA, Micro) in the battery compartment. Ensure that the
polarity corresponds to the illustration etched on the inside of the
battery compartment (+ must correspond with + and – with –).
Close the battery compartment again.
42
The Remote Control