Connecting A Sound Source/Audio Input; Connecting Usb Devices - Medion PC Manual

Connecting a Sound Source/Audio Input

Diagram reference: M1, M2
This port is used to accommodate a connecting cable for external analogue audio
sources (i.e. stereo system, keyboard/synthesizer).
1. Connect the cable with the 3.5 mm stereo jack plug to the light-blue col-
oured socket. You can also connect a stereo cinch cable (position M2).

Connecting USB Devices

Diagram reference: N
Warning!
Connect your USB devices after initial set-up of your new PC. This
will prevent unnecessary confusion during installation. These devices
can generally be connected during operation. Read the manual for
your peripheral device first.
•
The voltage outputs of your PC for USB are protected by a fuse (limited
power source according to EN60950). This ensures that a malfunction of the
PC will not damage the peripheral devices connected to the respective jacks.
You have a choice of several connection sockets. It does not matter which you use.
Note
Take care that the connector and the socket fit exactly to avoid dam-
aging the contacts. Because of its asymmetric form the plug only fits
into the socket in one position.
1. If you wish to use a printer, scanner or other device with a USB port, con-
nect the cable to the USB socket on your PC.
Note
Connect your devices always to the same port otherwise your operat-
ing system will give a new ID and asks for driver installation.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
- 17 -