Connecting The Monitor - Medion PC Manual

Connecting the Monitor

Diagram reference: M
Your PC is equipped with an analog connection (VGA, M).
Note
Take care that the connector and the socket fit exactly
to avoid damaging the contacts. Because of its asym-
metric form the plug only fits into the socket in one
position.
1. Connect the data cable of the monitor to the socket on the
graphics card (reference M). If necessary, remove the white
guard-ring on the monitor plug and ensure that the plug and
socket mate together precisely.
2. Hand-tighten the screws on the monitor cable.
Warning!
Your PC monitor is preconfigured for a screen resolu-
tion of 1024 x 768 pixels and an optimal refresh rate
of 75 Hz.
If your monitor does not support these settings it may
become damaged or malfunction during use. (See also
your monitor's User Manual)
You can change the screen resolution and configuration of your
monitor as follows:
1. Once you have powered on the PC, press the F8.
Note
If you don't hit the F8 key on time, you won't see the
start menu which gives you the option to run in Safe
Mode. Reboot your PC and retry if you have missed this.
2. Select Display Properties to designate the screen resolu-
tion for your monitor.
3. You can then adjust the "Display Features" to your monitor.
Setting up & Getting Started
17