Changing The Transmission/Reception Channels - Medion PC Manual

Changing the transmission/reception
channels
If several computers with remote controls are set up in close
proximity of each other (approx. 10 metres), this can lead to
disturbance. This can be remedied by choosing different channels.
Only reset the remote control in case of disturbances.
Proceed as follows:
1. Start the program Power Cinema in the program folder
Home Cinema.
2. Choose the menu item Settings and in the following screen
Set Remote Control Channel.
3. Reset the new channel (a number between 1 and 16) in
the software initially and confirm your setting with the OK
key. You will be passed on to the Channel Change option of
the remote automatically.
4. Press and hold the select button until the LED starts flash-
ing.
5. Now enter the new channel for the remote and confirm
with the OK key.
6. Close the Channel Change option by pressing the select
button.
46
The Remote Control