Lan Connection; Connecting A Sound Source/Audio Input; Connecting Speakers/Audio Output - Medion Erazer Instruction Manual

LAN Connection

Diagram reference: J
Your PC is equipped with a network connection, in order to prepare it for network opera-
tion.
The network cable usually has two RJ45 plugs so that it is unimportant which plug is con-
nected to which jack.
1. Connect the one plug of the cable to the PC jack.
2. Connect the other plug to the other PC or hub/switch.
For further information refer to chapter "The Network" starting at page 45.

Connecting a Sound Source/Audio Input

Diagram reference: K
This port is used to accommodate a connecting cable for external analogue audio sources
(i.e. stereo system, keyboard/synthesizer).
1. Connect the cable with the 3.5 mm stereo jack plug to the light-blue coloured
socket (K).

Connecting Speakers/Audio Output

Diagram reference: Q
Here you can connect your active speakers for replaying or audio connection cables for
recording. Please refer to the user's guide of your stereo installation for information about
which connector you should use (usually Line In or Aux).
1. Connect the cable with the 3.5 mm stereo jack plug into the green socket FS-OUT
on the rear of your PC.
Connecting
- 19 -