Saddle Stitch Finisher - Sharp AR-C170M Operation Manual

3 Advanced image processing features based on digital technology
The scanned image data is converted to digital data, enabling the following advanced image processing features:
G G G G Photo Repeat :
Up to 24 full-size copies of a photo image can be made on a single sheet of paper (page 6-18).
G G G G Multi shot :
Up to four original pages can be copied onto a single sheet (page 6-19).
G G G G Pamphlet copy* :
Copies of original pages are arranged in proper order for copying so that the copies can be centre-stapled and
folded into a pamphlet (page 6-25).
* Pamphlet copy requires the Duplex module/2 x 500 sheet paper drawer and Duplex bypass/inverter unit
options. If a saddle stitch finisher is installed, copies can be stapled in two positions along the centre of copies
and folded at the centre.
* Pamphlet copy is only possible with black and white copies.
4 Image processing manual exposure adjustment for optimal copying
Image processing is optimized for the type of original being copied (text, photo, mixed text and photo or map).
This along with the ability to manually adjust exposure makes it possible to obtain copies that are faithful to the
original.
Standard offset function makes it easy to distinguish between sets of copies
5
As sets of copies are delivered to the centre tray, each set is offset from the previous set for easy separation.
Energy saving features
This product has the following two power reducing modes that conform to the
Energy Star guidelines to help conserve natural resources and reduce
environmental pollution.
Preheat mode
Preheat mode automatically reduces the temperature of the fusing unit after
the time set in the key operator programs elapses when the machine is on
standby. This allows the machine to use less power while on standby. The
machine automatically returns to normal operation when a key is pressed on
the operation panel, or when an original is placed to make a copy or send a
fax.
Auto power shut-off mode
Auto power shut-off mode automatically shuts off power to the fusing unit
after the time set in the key operator programs elapses when the machine is
on standby. This minimizes the power used by the machine while on
standby. When this mode activates, the touch panel screen turns off.
To return the machine to normal operation, press the mode select key (the
indicator of this key will be lit).
Auto power shut-off mode can be configured in the key operator programs.
The mode is initially set (factory default setting) to activate after 60 seconds
elapses. (See page 9 of the key operator's guide.)
If a print job or fax is received while auto power shut-off mode or preheat
mode is activated, the machine automatically returns to normal operation.
MAIN FEATURES
®
E S
As an NERGY TAR
Partner, SHARP has
determined that this product
E
meets the NERGY
S ®
TAR guidelines for
energy efficiency.
1-3
1