Dual Page Copy - Sharp AR-C170M Operation Manual

SPECIAL MODES

Dual page copy

The dual page copy function produces separate copies of two documents placed side by side on the document glass.
It is especially useful when copying books and other bound documents.
[Example] Copying right and left pages of a book
Book original
1 Touch the [DUAL PAGE COPY] key on the
SPECIAL MODES screen.
DUAL PAGE
COPY
TRANSPARENCY
INSERTS
Touch the [OK] key on the SPECIAL
2
MODES screen.
Return to the main screen of copy mode.
OK
PAGE
3 Place the originals on the document glass.
Centre line of
original
Index
8 ½ x11 A4
6-6
Dual page copy
The [DUAL PAGE
COPY] key will be
highlighted to indicate
that the function is
turned on, and the dual
page copy icon ( ) will
appear in the upper left
of the screen.
This page
is copied
first.
G The dual page copy function can be used with reduction
copying but cannot be used with enlargement copying.
G The dual page copy function can be done only from the
document glass. The reversing single pass feeder
cannot be used with this function.
G Only A4 (8-1/2" x 11") paper can be used.
When copying book originals:
When copying a thick book, press down lightly on
the book to flatten it against the document glass.
4 Ensure that A4 (8-1/2" x 11") size paper is
selected.
AUTO A4
PAPER SELECT
100 %
About the steps that follow
For two-sided copying, follow steps 2 through 4
on page 5-9 and then follow steps 4 through 7
on page 5-8.
For one-sided copying, follow steps 4 through
7 on page 5-8.
To cancel the dual page copy function, touch the
[DUAL PAGE COPY] key on the special modes
screen (step 1). (The highlighted display will be
cancelled.)
NOTE
To erase shadows caused by document binding, use
the edge erase function (page 6-5). (Centre Erase
and Edge + Centre Erase cannot be used in
combination.)
If A4 (8-1/2" x 11") size
paper is not selected,
touch the [PAPER
SELECT] key to select
A4 (8-1/2" x 11") size
paper.