Part Names And Functions; G Exterior; Exterior - Sharp AR-C170M Operation Manual

PART NAMES AND FUNCTIONS

Exterior

Without the duplex
bypass/inverter unit
installed.
Left tray (See page 5-5)
Finished sheets are deposited here.
Left side cover
Open this cover when a paper misfeed occurs in
the fusing unit or the transfer unit.
Reversing single pass feeder
This automatically feeds originals to be scanned.
The feeder can turn the original over and scan the
back side as well as the front side for support of
two-sided originals.
Power switch
Press to turn power on and off.
Front cover
Open to replace toner cartridge.
Operation panel
Centre tray (See page 5-5)
Finished sheets are deposited here.
* , , and are peripheral devices. For a description of these devices, see page 1-6.
1-4
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
Stand/1 x 500 sheet paper drawer *
(See page 2-7)
Stand/3 x 500 sheet paper drawer *
(See page 2-7)
Duplex module/2 x 500 sheet paper drawer*
(See page 2-8)
Paper tray
Each tray can hold approximately 500 sheets of the
recommended paper for colour (80 g/m
or approximately 500 sheets of SHARP standard
paper (80 g/m or 21 lbs.).
2
Left side cover release
Push this release up to open the left side cover.
Duplex bypass/inverter unit * (See page 1-6)
or 21 lbs.),
2