G Xy Zoom; Xy Zoom - Sharp AR-C170M Operation Manual

XY ZOOM

The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently.
Five preset ratios (maximum 400%, minimum 25%) can be selected with the enlargement and reduction keys. In
addition, the zoom keys can be used to select any ratio from 50% to 200% in increments of 1%.
NOTE
When the reversing single pass feeder is used, the ratio can only be set within the range 50% to 200%.
Example: Selecting 100% for the length and 50% for the width
Original
1 Place the original in the document feeder
tray or on the document glass. (page 4-6)
2 Touch the [COPY RATIO] key on the touch
panel.
PLAIN
AUTO A4
A4
PAPER SELECT
100 %
COPY RATIO
3 Touch the [XY ZOOM] key.
READY TO COPY.
100
%
ZOOM
B4 B5 B5 A5 A4 B5
70 % 81 % 86
A3 A4 B4 A4 A3 B4
B5 A4 A5 B5 B5 B4
115 % 122 % 141
B4 A3 A4 B4 A4 A3
XY ZOOM MENU
1 2
4 Touch the [X] key.
%
X 100 %
A
Y 100 %
%
ZOOM
%
Copy
0
OK
AUTO
EXPOSURE
AUTO A4
%
PAPER SELECT
%
100
%
COPY RATIO
AUTO IMAGE
1
2
4
REDUCTION/ENLARGEMENT/ZOOM
5 Use the reduction, enlargement, and
ZOOM ([ ], [
copy ratio in the horizontal (X) direction.
A
Y
64 %
ZOOM
50 %
XY ZOOM
%
X 50 %
A
Y 100
%
%
ZOOM
%
CANCEL
XY ZOOM
NOTE
Touch a reduction key or an enlargement key to set
the approximate ratio, then touch the [
decrease the ratio or [
6 Touch the [Y] key.
%
50
X %
A
Y 100
%
%
ZOOM
%
AN EL
XY ZOOM
]) keys to change the
A fixed ratio key will not
become highlighted
when touched.
When the reversing
single pass feeder is
used, the ratio can only
be set within the range
50% to 200%.
1
The zoom keys can be
used to change the ratio
from 50% to 200% in
2
increments of 1%.
Touch the [ ] key to
4
increase the ratio, or the
[ ] key to decrease
the ratio. If you continue
to touch either key for 3
seconds, the ratio
begins to change
quickly.
] key to
] key to increase the ratio.
1
2
4
5-15
5