G Loading Paper In The Stand/1 X 500 Sheet Paper Drawer; Stand/3 X 500 Sheet Paper Drawer; Loading Paper In The Stand/1 X 500 Sheet Paper Drawer/Stand/3 X 500 Sheet Paper Drawer; Specifications (Stand/1 X 500 Sheet Paper Drawer/Stand/3 X 500 Sheet Paper Drawer) - Sharp AR-C170M Operation Manual

1 Unlatch the duplex bypass/inverter unit
and slide it to the left.
2 Lower the two fusing unit pressure
adjusting levers marked A and B in the
illustration.
Normal
position
Lower pressure
B:Front side of
position
fusing unit
Loading paper in the stand/1 x 500 sheet paper drawer/

stand/3 x 500 sheet paper drawer

Upper tray / middle tray / lower tray*
Up to 500 sheets of paper recommended for colour or SHARP recommended plain paper can be loaded in these
trays. The method of loading paper is the same as for paper tray 1 in the main unit (see the explanation on page 2-2).
* The stand/1 x 500 sheet paper drawer only has the upper tray.
NOTE
If the size of paper being loaded is different from the previous size, or is an extra size, or if the paper type is different
from the previous type, you must change the paper tray settings in the custom settings. Change the settings as
explained in "Setting the paper type" and "Setting the paper size when an extra size is loaded" on page 2-11.
Specifications (stand/1 x 500 sheet paper drawer/stand/3 x
500 sheet paper drawer)
Name
Paper size/weight
Paper capacity
Power supply
Dimensions
Weight
The stand/3 x 500 sheet paper drawer cannot be installed at the same time as the large capacity tray.
Specifications are subject to change for improvement without notice.
Unlatch the unit and
gently move it away from
the machine. If the
machine is not equipped
with a duplex bypass/
inverter unit, open the
side cover similarly.
A
B
A:Rear side of
fusing unit
Stand/1 x 500 sheet paper drawer (AR-D17N)
A3, B4, A4, A4R, B5, B5R, A5, Extra. (11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2")
Paper recommended for colour (80 g/m
SHARP standard paper (80 g/m
600 mm (W) x 642 mm (D) x 403 mm (H) (23-5/8" (W) x 25-9/32" (D) x 15-7/8" (H))
Approximately 22.5 kg or 49.6 lbs.
3 Gently close the duplex bypass/inverter
unit.
Stand/3 x 500 sheet paper drawer (AR-D18N)
/ 64 to 105 g/m 2 or 17 to 28 lbs.
2 or 21 lbs.): 500 sheets;
2 or 21 lbs.): 500 sheets
Supplied from the main unit
(not including the adjuster)
Approximately 29.5 kg or 65.0 lbs.
LOADING PAPER
If the machine is not
equipped with a duplex
bypass/inverter unit,
close the side cover.
2-7
2