Sharp AR-C170M Operation Manual page 51

Staple
Saddle stitch
Power supply
Dimensions
Weight
Overall dimensions when
attached to machine
Remarks
Paper output
Paper full detection
Offset function
Paper conveying
Name
Model*
1
Number of holes
Paper sizes for hole
punching
Power supply
Dimensions
Weight
*1 Multiple punch modules cannot be installed together. Some models may not be available in some regions.
*2 With AR-PN1B, two or three holes can be punched depending on the paper size.
*3 With AR-PN1C and AR-PN1D, the number of holes is the same. The hole interval, however, is not the same.
Specifications are subject to change for improvement without notice.
NOTES
G Transparency film, envelopes, postcards, and other special papers cannot be stapled.
G If mixed paper sizes are selected for stapling jobs, stapling will be automatically cancelled.
Supplies
AR-SC2 staple cartridges must be used for this finisher.
The cartridge package contains three cartridges of approximately 5000 staples
each.
Allowed paper sizes for stapling
Upper tray: A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R
Lower tray: A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
Maximum number of sheets for stapling
See "Staple sort mode" on the next page
Stapling positions
Upper tray: 3 locations (1 position back, 1 position front, 2 positions centre)
Lower tray: 120 mm (4-47/64") pitch from centre of paper
Maximum of 10 sheets can be stapled (80 g/m
Paper size: A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
Paper weight: 64 to 105 g/m
Supplied from machine (Stand / paper drawer)
633mm(W) x 603mm(D) x 771mm(H) (24-59/64" (W) x 23-3/4" (D) x 30-23/64" (H))
Approximately 36kg (79.4lbs.)
1432mm(W) x 676mm(D) (when tray is extended)
Upper tray: Supports both face-up and face-down output Lower tray: Face-down output only
Both upper and lower tray
Upper tray only (offset function not possible for A3W, A5R, 12" x 18" and
5-1/2" x 8-1/2"R size paper)
Centre reference
Punch module
AR-PN1A AR-PN1B*
2
11"x17", 8-1/2"x14", 3 holes: 11" x 17",
8-1/2"x13", 8-1/2" x 11", A3, A4
8-1/2"x11", 2 holes: 8-1/2"x14",
8-1/2"x11"R, A3, B4, 8-1/2" x 11"R
A4, A4R, B5, B5R
Supplied from machine saddle stitch finisher
95mm(W) x 560mm(D) x 170mm(H) (3-3/4" (W) x 22-1/16" (D) x 6-45/64" (H))
Approximately 2.5kg (5.6lbs.)
or 21 lbs.)
2
or 17 to 28 lbs.
2
AR-PN1C*
2
3 or 2 4
A3, A4
SADDLE STITCH FINISHER
AR-PN1D*
3 3
4
11"x17", 8-1/2"x14",
8-1/2"x13",
8-1/2"x11",
8-1/2"x11"R, A3, B4,
A4, A4R, B5, B5R
3-3
3