Table of Contents
Advertisement
Date and Time Adjustment
This program is used to adjust the date and time which will be used for
printing date.
When the "DATE AND TIME ADJUSTMENT." key is pressed, the
following display will appear.
Rotation Copy Setting
If this program is set, the image of originals will rotate when the
orientation of the originals does not match that of the copy paper.
Rotation copy will function only when the auto paper select or auto
copy ratio mode has been selected.
When the STAPLE SORT function is used, rotation copy will not be
performed even if this program has been set.
NOTE:
If the image is rotated in reduction copying, the position of the image
in relation to copy paper will vary with the orientations of the originals
and copy paper.
Original
KEY OPERATOR PROGRAMS
1.
Select an item to be adjusted and adjust the value using
the
Repeat this step for all desired items.
2.
Press the "OK" key.
If an invalid date (example: February 31) has been entered in
step 1, the "OK" key will be disabled.
Copy paper
To enable rotation copy, press the check box of "ROTATION
COPY SETTING." to display a check mark in the check box.
To disable this mode, press the check box of this program
again to clear the check mark in the check box.
KEY OPERATOR PROGRAMS
DATE AND TIME ADJUSTMENT.
YEAR
MONTH
DAY
HOUR
1999
10
12
00
( 00~23 )
and
keys.
Copy
OK
MINUTE
00
8-21
Advertisement
Table of Contents
Troubleshooting
