Rotation Sending Setting; Quick On Line Sending; Call Timer At Memory Sending; Recall In Case Of Line Busy - Sharp AR-FX7 Operation Manual

ROTATION SENDING SETTING

This setting allows you to select whether or not a
vertically placed A4 original is rotated to a horizontal
orientation (A4R), an A5R original is rotated to A5, or
an 8-1/2" x 11" original is rotated to 8-1/2" x 11"R
before transmission. The image is rotated clockwise.
(A4R and 8-1/2" x 11"R originals are not rotated.)
In Taiwan, select whether or not an A4 original is
rotated to A4R, a B5R original is rotated to B5, an A5R
original is rotated to A5, or an 8-1/2" x 11" original is
rotated to 8-1/2" x 11"R before transmission.
KEY OPERATOR PROGRAMS
ROTATION SENDING SETTING
ORIGINAL SENDING
SET DIRECTION
A4 A4R
A5R A5
Rotation settings can be established separately for
different document sizes. To disable a rotation setting,
touch the checkbox of the appropriate setting to
remove the checkmark.

CALL TIMER AT MEMORY SENDING

When sending a fax by automatic transmission
("Storing transmission jobs (memory transmission)"
(p.15)), this setting lets you select the amount of time
that the machine waits before breaking the connection
when the other machine does not respond to your
machine's calling tone. If the other machine does not
respond within this set time, your machine will
automatically break the connection.
Time selections are [30 sec.], [45 sec.], and [60 sec.].

RECALL IN CASE OF LINE BUSY

When sending a document, this setting is used to
select whether your machine will automatically
re-attempt the call when the other machine fails to
answer or the line is busy. The number of recall
attempts can be set from 1 to 9, and the interval
between attempts can be set from 1 to 15 minutes in
increments of 1 minute. To disable automatic recalling,
select the [NO RECALL] checkbox.
Even if this setting is enabled, your machine
Note
will not re-attempt the call when a document
is sent by manual transmission.
OK
ORIGINAL SENDING
SET DIRECTION
8 1 / x11 8 1 / x11R
2 2
KEY OPERATOR PROGRAMS
RECALL IN CASE OF
COMMUNICATION ERROR
When sending a document, this setting is used to
select whether your machine will automatically
re-attempt the call if the transmission fails due to a line
error. One recall attempt or no recall attempts can be
selected, and the interval until the attempt can be set
from 0 to 15 minutes in increments of 1 minute.
Even if one attempt is selected, your
Note
machine will not re-attempt the call when a
document is sent by manual transmission.

QUICK ON LINE SENDING

When this program is enabled and memory
transmission is selected, the machine will call the
receiving machine while the original pages are being
scanned and begin transmission from pages that have
finished scanning.
When the program is disabled, transmission will not
begin until all pages have been scanned (with the
exception of manual transmission and direct
transmission). ("Quick On-line" (p.14))
8
101