Adding Toner - Sharp AR-505 Operation Manual

ADDING TONER

Sealing tape
4-6
Place the new toner cartridge with the protrusions in the
4
notches as shown.
Slide the toner cartridge along the guides over the toner
5
hopper.
Hold the toner cartridge with one hand and bend the
6
protrusion at the sealing tape as shown in the illustration.
Pull on the sealing tape to remove it.
7
Tap on the top of the toner cartridge 5 times to start the
8
flow of toner into the toner hopper.
If the toner cartridge was sufficiently shaken as described in step
3, it will take about 50 seconds for the cartridge to empty. Do not
remove the cartridge until it is empty. If not empty, tap on the top
of the cartridge again until empty.
Slide the empty toner cartridge back along the guides
9
and remove it.
The cartridge opening will be closed as it is moved back along
the guides.
Slide the toner hopper into the copier and return the
10
toner hopper lock lever into place.
Close the front cover.
11
NOTE:
Add only one cartridge of toner.