Key Operator Code Number; Registering The Key Operator Code Number - Sharp AR-505 Operation Manual

KEY OPERATOR CODE NUMBER

A key operator code number must be registered before a key operator
program can be used. The key operator must remember this number. Only
this registered number will allow access to the key operator programs.
6~200 g /m
2
CUSTOM SETTINGS
DISPLAY KEY OPERATOR
CONTRAST PROGRAMS
AUTO AUTO A4
EXPOSURE PAPER SELECT
2
1
4 5
7 8
AUDIT CLEAR
PROGRAM
0
KEY OPERATOR PROGRAMS
COPIER COPIER PDA/ZR
PROGRAM LIST
TOTAL COUNT.
PRINTOUT.
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
TIMER SETTINGS
SETTINGS
ENABLE/DISABLE
ACCOUNT CONTROL
SETTINGS
8-2

Registering the key operator code number

Press the CUSTOM SETTINGS (
1
Press the "KEY OPERATOR PROGRAMS" key on the
2
touch panel.
EXIT
The following display will appear.
100%
COPY RATIO
3
INTERRUPT
6
Enter your key operator code number using the 10-key
3
9 CLEAR pad.
C
When registering the key operator code number for the first time,
P
enter the number that was set at the factory. (See page 8-33.)
As the code number is entered, the dashes in the display will
change to asterisks.
EXIT
Press the "COPIER" key on the touch panel.
4
Press the "OTHER FUNCTION SETTINGS" key.
5
OK
KEY OPERATOR PROGRAMS
ENTER KEY OPERATOR CODE.
KEY OPERATOR CODE
- - - - -
) key.
EXIT