Tandem Copy - Sharp AR-505 Operation Manual

TANDEM COPY

OK
DUAL PAGE
COPY
TRANSPARENCY
INSERTS
2 3
1
4 5
6
7
8 9
AUDIT CLEAR PROGRAM
0
P
INTERRUPT CLEAR ALL
CA
START
CLEAR
C
3-44
Press the "OK" key.
5
Make all other desired copier settings and enter the
6
INTERRUPT
number of copies.
The functions selected on the main copier will be used by both
copiers. Any function selected on the main copier which has
been disabled by a key operator program cannot be used by
CLEAR either copier.
C
Ensure that paper of the same size selected in the main
7
copier is installed in the sub copier.
Paper of the same size and same orientation must be installed
in the two copiers. Even if the image of the original is rotated to
match the copy paper in the main copier, the orientation of the
copy paper in the sub copier must be the same as that in the
master copier.
On the main copier, press the START (
8
Images scanned by the main copier will be stored in both copiers.
Half the number of copies selected will be made simultaneously
on both copiers. When the number of copies selected is odd, one
more copy will be made on the main copier than the sub copier.
If the message "CHECK THE SUB MACHINE." appears on the
main machine, an error has occurred in the sub machine. Check
the message on the sub machine and clear the error.
To cancel a copy run after starting, press the CLEAR ALL (
key on the main copier.
To cancel the TANDEM copying, press the "TANDEM COPY"
key again on the SPECIAL MODES screen of the main copier.
) key.
)
CA