Staple Cartridge Replacement - Sharp AR-505 Operation Manual

FINISHER (AR-FN3)

Staple cartridge replacement

The message "SLIDE THE FINISHER AWAY FROM THE COPIER
AND ADD STAPLES." will appear when the staple cartridge is empty.
Replace the staple cartridge as follows:
7-10
While holding the finisher release lever, slide the finisher
1
away from the copier.
Lower the lock lever to unlock the stapler unit.
2
Turn the stapler unit to face up.
3
Hold the staple box release lever to unlatch the staple
4
box.
Remove the staple box.
5
Remove the empty staple cartridge from inside the
6
staple box.
Insert the new staple cartridge into the box until it clicks
7
in place.
Insert the new cartridge by aligning the arrows on the cartridge
with those on the box. Check that the cartridge locks in place by
pulling it slightly.
The cartridge holds 5,000 staples.