Sharp AR-505 Operation Manual page 120

FINISHER (AR-FN3)
Stapling position
READY TO COPY.
OUTPUT
TOP TRAY
STAPLE
OFFSET
SORT SORT
TRAY
OFFSET
AUTO AUTO A4
EXPOSURE PAPER SELECT
OPY.
STAPLE
SORT SORT
7-8
Using the document glass
Set the original on the document glass with the corner
1
to be stapled to the upper right.
Copy from the last page to the first page.
If the number of copies in one set is more than 50 for
A4 or A4R (8-1/2" x 11" or 8-1/2" x 11"R) paper or 25 for B4 or
A3 (8-1/2" x 14" or 11" x 17") paper, the copies will not be
stapled.
The stapling position shown in the left figure is the factory de-
fault position.
Press the OUTPUT key.
2
AUTO
EXPOSURE
Press the "STAPLE SORT" key on the touch panel.
3
OK
GROUP
100%
COPY RATIO
Select the desired stapling position.
4
The AR-FN3 finisher has three selectable stapling positions as
OK
shown below.
GROUP