Monitoring - Samsung SHR-4080P User Manual

3

Monitoring

Event Monitoring
You are able to set to Off/3sec/5sec/10sec/20sec/30sec/Continuous.
Off : Event Monitoring does not operate to turn to the screen where an event
3sec/ 5sec/ 10sec/ 20sec/ 30sec : For the period, the screen is seen before the
Continuous : The Event Monitoring screen remains alive until you press the front
OSG Display
Date : The date is displayed on the screen or not depending Date remains On or Off.
Time : The time is displayed on the screen or not depending Time remains On or Off.
Title : The title is displayed on the screen or not depending Title remains On or Off.
Status : Audio/Ptz is displayed on the screen or not depending Status remains
Spot Out Channel
Spot Out channel is used to let one of two monitors monitor a channel, focusing on
it. Spot Out channel supplies two functions, continuous monitoring of only one
channel and Auto Sequence to display all the channels one by one.
Auto Seq. setup ranges from Ch1 to Ch8.
Set to Auto Seq., Spot Out channels are displayed in turn.
Auto Seq. Duration is as same as determined for Camera Configuration.
Spot Out Event Monitor
Determines if event monitoring will be executed for Spot Out channels.
Off : dose not event monitoring in Spot out channel.
3sec/ 5sec/ 10sec/ 20sec/ 30sec : Duration options on the screen before it
Continuous : Once scrolled down, the screen remains displayed until you delete
occurs.
"Alarm" button to cancel the screen manually.
On or Off.
"Alarm" LED in front manually.
next screen appears.
scrolls down.
5-16