Samsung SHR-1040K User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. DVR
  5. SHR-1040K
  6. User manual
Samsung SHR-1040K User Manual

Samsung SHR-1040K User Manual

Samsung digital video recorder user's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

DIGITAL VIDEO RECORDER

SHR-1040/SHR-1040K User's Manual
English
Français
Spanish

Advertisement

Table of Contents
loading

Related Manuals for Samsung SHR-1040K

Summary of Contents for Samsung SHR-1040K

  • Page 1: Digital Video Recorder

    DIGITAL VIDEO RECORDER SHR-1040/SHR-1040K User’s Manual English Français Spanish...

  • Page 2: Safety Regulations

    SHR-1040/1040K USER’S MANUAL Safety Regulations Please be sure to keep the following in mind for the right use of the product to pre-vent proprietary risk or damage. Do not use multiple plugs at once. This may cause abnormal heat generation or fire Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel with water around you.

  • Page 3: Before We Start

    Before we start This User’s Manual describes the basic usage of SHR-1040. This Manual contains all the matters necessary for using SHR-1040 such as brief instruction, part name, function, connecting other equipment, and menu setup of SHR-1040. SEC retains the copyright on this User’s Manual. This User’s Manual cannot be copied without SEC’s prior written approval.

  • Page 4: Table Of Contents

    Contents English Safety Regulations Before we start Standards Approvals Chapter 1. Overview 1. Introduction 2. Features 3. Part Names and Functions 4. Remote Controller Chapter 2. Installation 1. Installation Environment Setup 2. Checking Product & Accessory 3. HDD Addtion Chapter 3. DIY Carmera 1.
  • Page 5 Chapter 6. Menu Setup 1. Main Setup Menu 2. Clock/Display Setup 3. Record Mode Setup 4. Title Setup 5. Dwell Time Setup 6. Alarm Setup 7. Event Record Mode Setup 8. Timer Record Setup 6-10 9. System Setup 6-14 10. System Information Chapter 7.

  • Page 6: Chapter 1. Overview

    Chapter 1. Overview English...

  • Page 7: Introduction

    MPEG4 format, and audio data in installed HDD format, by using the G-723 compression standard. DVR is a digital device that stores video and audio data by using a hard disk drive, unlike a video cassette recorder using video tapes. DVR enables users to easily play back and search stored data, and edit and send data which are stored in digital signal format.

  • Page 8: Features

    Features Adjusts recorded data in three steps. - HIGH, NORMAL, LOW Adjusts the number of record fields per second. - NTSC : 1~ MAX 30 IPS Records before-event (Alarm or Motion) data based on pre-set hours. (Pre-Alarm) - 0 ~ 5SEC Audio-records and plays back selected channels.
  • Page 9 SHR-1040/1040K USER’S MANUAL SHR-1040/1040K USER’S MANUAL Part Names & Function English [SHR-1040] Name Power LED Displays power On/Off condition. Alarm LED lights on when an event occurs. Displays Normal Access to HDD. Upon Access to HDD, LED HDD LED repeats on and off. Rec LED Displays the record condition.
  • Page 10 Name ZOOM ZOOM FREEZE FREEZE SEQUENCE SEQUENCE ALARM ALARM RECORD Fast/Step Reverse STOP PLAY/PAUSE Fast/Step Forward ➛ œ ❿ ❷ ➛ Function You can view X2 screen by pressing the ZOOM Button in the single screen. When you press the up/down and the left/right key in the Zoom screen, the selected Zoom Area moves.
  • Page 11 The ventilation outlet may be blocked. Do not operate the DVR on a carpet or other soft surfaces. When you operate the DVR in a cabinet or on a rack, check whether a ventilation device is properly installed. CAM IN RJ-11...

  • Page 12: Remote Controller

    Remote Controller 1. RECORD Starts the recording as the setup record setting in normal record mode. 2. ID RESET The ID is reset. 3. NUMBER KEY Press to select one of single channels in Live mode. Use this for typing purposes in a numeric input mode.

  • Page 13: Chapter 2. Installation

    Chapter 2. Installation English...

  • Page 14: Installation Environment Setup

    SHR-1040/1040K USER’S MANUAL Installation Environment Setup Do not play DVR on the carpet or other soft material to prevent clogging of the air ventilator. To play DVR on the cabinet or rack, be sure to check the ventilation condition. You should pay attention to the following before you use the product.

  • Page 15: Checking Product & Accessory

    SHR-1040/XAA : No.1 ~ No.7 items are only included. WARNING) SHR-1040 set must use the adapter we provide. Adapter Power Cord (AB44-00015A) (AB39-10601F) (B68-00592A) Camera Bracket Camera Cable Model Q’ty SHR-1040/XAA SHR-1040K/XAA SHR-1040 ADP-5412WD SOC-N120 SOC-C120 SBR-110S MCB-60 Remote Controller Battery Alkaline (AB39-10601F)

  • Page 16: Installation Instructions

    SHR-1040/1040K USER’S MANUAL HDD Addtion You can install one additional hard disk drive inside the product (Max. 2 HDDs). However, there are lots of factors inside that may cause electrical shock, physical damage or malfunction. So please follow the instructions below to mount the HDD as the product couldn’...
  • Page 17 5. Disconnect the power supply cable and the signal cable (IDE cable) from the current HDD. Push the bracket to the arrow direction as in the picture below and lift it up from the bottom. 6. Use the four screws provided (SCREW-SPECIAL: PWH,+,-,6-32UNC,L14.7(4.2),ZPC) to fix the old HDD and the additional with the bracket (Make sure you fasten the screws firmly so that they are not loose from vibration).
  • Page 18 SHR-1040/1040K USER’S MANUAL 7. Mount the HDD-fixed bracket to its original position. (Installation is done in the reverse order of the disas- sembly. Fit the bracket (BRACKET-HDD) into the bottom hole and fix the screw). 8. When done (make sure the bracket is firmly fixed), connect the power supply cable and the signal cable (IDE) to both the old and the additional HDD (see the picture below).
  • Page 19 10. Use the screws (two for each side and one for the rear) in step 1 above to fix the cover. English English English...

  • Page 21: Chapter 3. Diy Carmera

    Chapter 3. DIY Carmera English English English...

  • Page 22: Standard Camera

    SHR-1040/1040K USER’S MANUAL Standard Camera Composition and Installation Method 1) STANDARD CAMERA COMPOSITION (SOC-C120) a. Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. b. Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor. c.
  • Page 23 2) INSTALLING STANDARD CAMERA (SOC-C120) SOC-C120 camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-110S). Choose an installation site that can sufficiently support the weight of the equipment to be installed. Attach the camera mount bracket to the wall or ceiling using the supplied three screws (M4 X L15).
  • Page 24 SHR-1040/1040K USER’S MANUAL • Adjust the camera to target the video location and tighten the bracket handle on the camera mount bracket. Install the camera on to the male screw of the Camera Mount Bracket by rotating the camera in clockwise. •...
  • Page 25 Connection status checking method : • Turn on the DVR after connecting cameras, and check if camera image is displayed. • If the DVR and the camera are not connected properly, OSD ‘L’(LOSS) will be displayed on screen. English English...

  • Page 26: Nightvision Camera

    SHR-1040/1040K USER’S MANUAL Nightvision Camera 1) Before Installation SOC-N120 INTRODUCTION SOC-N120 Nightvision camera is intended to be used exclusively with those sold by this company for DIY. With the built-in IR LED and light sensor in the camera, both day monitoring and night monitoring are possible.
  • Page 27 3) Installation 1. Make sure the installation location is a place where 5 times (about 2.2lbs) of the total weight of the camera can be tolerated before installing the camera. 2. Connect the cable below the camera after attaching the provided Mount Bracket to the desired place.
  • Page 28 It outputs the sound signal which was transfered from alarm sensor. g). Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor. h). 6-pin modular jack Used to connect the camera to the monitor or DVR. English...

  • Page 29: Chapter 4. Connecting With Other Device

    Chapter 4. Connecting with other device English...

  • Page 30: Connecting The Video, Audio, And Monitor

    SHR-1040/1040K USER’S MANUAL SHR-1040/1040K USER’S MANUAL Connecting the Video, Audio, and Monitor Caution Caution - Do not connect the Video In (BNC Input) and the RJ-11 (DIY Camera) input with the same channel at the same time. If connecting them simultaneously, two input signals may be mixed when outputting.

  • Page 31: Connecting The Alarm Input/Output

    Connecting the Alarm Input/Output The Alarm IN/OUT port in the back of SHR-1040 is composed of the following elements. ALARM IN/OUT Connection ALM OUT ALM RST ALM IN Name Function ALM IN ALARM Input Port ALM OUT ALARM Output Port On receiving an ALARM RESET signal, the sys- ALM RST tem cancels the current ALARM input and output...

  • Page 32: Chapter 5. Basic Operation

    Chapter 5. Basic Operation English...

  • Page 33: System Operation

    SHR-1040/1040K USER’S MANUAL SHR-1040/1040K USER’S MANUAL System Operation Turning Power On When the adapter is connected to the DC 12V connector on the back panel, the Power LED on the front is lit. The following screen appears, and the system is booted. Detection of Video In Signals If no video signals exist when the system is turned on, the letter L (for Loss) lappears next to the title (CAM1…CAM2) of the screen, and the screen turns black.

  • Page 34: Live Screen Mode

    Live Screen Mode Full Display Screen Markers and displays on the screen are seen as below. 05/05/01 00:00:01 PLAY Play 01/01/06 12:00:00 AML CAM 1 AML CAM 2 AML CAM 3 AML CAM 4 For Live, it indicates the current time and date as set in the system. For playback, it indicates the time and date of the data recording.

  • Page 35: Key Functions

    SHR-1040/1040K USER’S MANUAL Key Functions 1. CHANNEL KEY & MODE KEY Use the CHANNEL Key when you want to view the channel in full screen. Press the desired channel key to view the channel in full screen. Audio of the channel is also selected. The S mark appears next to the title of the selected channel, and the audio of the channel is off.

  • Page 36: Zoom Key

    3. ZOOM KEY The ZOOM Key is used to X2 zoom the selected area in 1CH mode. Press the ZOOM Key to display the ZOOM area (default: Center Area). Press the ZOOM Key repeatedly to display or clear the ZOOM area. Press the ZOOM Key to zoom the selected area, and press the ENTER key to clear the ZOOM and display the marked area.

  • Page 37: Sequence Key

    SHR-1040/1040K USER’S MANUAL 5. SEQUENCE KEY The Sequence Key is used for automatic channel sequencing. It is enabled only in Live Mode. Channels are switched in sequence and the Loss channel without video signals are skipped during the Dwell Time set by the Setup Menu. (Switch from 1channel ➝...

  • Page 38: Chapter 6. Menu Setup

    Chapter 6. Menu Setup English...

  • Page 39: Main Setup Menu

    SHR-1040/1040K USER’S MANUAL SHR-1040/1040K USER’S MANUAL Main Setup Menu 1. CLOCK/DISPLAY - Set the time, date and display items. 2. RECORD MODE - Set record-related items. 3. TITLE SETUP - Set channel titles. 4. DWELL TIME SETUP - Set the dwell time for each channel for sequence operations. 5.

  • Page 40: Clock/Display Setup

    Clock/Display Setup Set the time, date and display items. (1) DATE TYPE - Date can be displayed in three types, and the user can choose one among the three. [YY/MM/DD, MM/DD/YY, DD/MM/YY] (2) DATE - Set the present data. (3) TIME [HH:MM:SS] - Set the present time.

  • Page 41: Record Mode Setup

    SHR-1040/1040K USER’S MANUAL Record Mode Setup (1) PICTURE QUALITY - Define the picture quality in three steps when recording. High means top quality, followed by Normal and Low. [NORMAL/HIGH/LOW] (2) PICTURE RATE - Set the number of record fields for video In. [1/2.5/3.75/7.5/15/30] (3) DISK END MODE - When the mode is set to Stop, recording is stopped if the HDD becomes full during recording.

  • Page 42: Title Setup

    Title Setup The default settings of the title setup menu are shown as follows. (1) TITLE SETUP - You can set the title of each channel as you want. - You can change the title by using …,†,œ,√, 0 1 2 3 4 5 6 7 8 9 ABCDEFGHIJKLMNOPQRSTUVWXYZ : = .

  • Page 43: Dwell Time Setup

    SHR-1040/1040K USER’S MANUAL Dwell Time Setup The default settings of the Dwell Time are shown as follows. (1) DWELL TIME SETUP - Press the Sequence button in single screen to enter Sequence Mode. You can set the dwell time of each channel before switching.

  • Page 44: Alarm Setup

    Alarm Setup The default settings of the Alarm Setup Menu are shown as follows. (1) ALARM SETUP - Set the alarm setup to ‘ON’ to enable the alarm of each camera. Set the setup to ‘OFF’ to disenable alarm. [ON/OFF] (2) HOLD TIME - When Alarm occurs, set the hold time of alarm.

  • Page 45: Event Record Mode Setup

    SHR-1040/1040K USER’S MANUAL Event Record Mode Setup The default settings of the Alarm/Motion Recording Setup menu are shown as follows. (1) EVENT RECORD ENABLE Set the EVENT RECORD ENABLE to ‘On’ to start recording when alarm occurs, and set the EVENT RECORD ENABLE to ‘Off’...
  • Page 46 (4) MOTION DETECTION - When the Motion Detection is set to ‘ON’, the system records input video whenever a motion is detected. [ON/OFF] (5) SENSITIVITY - You can set the level of sensitivity of motion detection when setting motion detection. HIGH/NORMAL/LOW.

  • Page 47: Timer Record Setup

    SHR-1040/1040K USER’S MANUAL - Motion is detected only from channels set to ‘On.’ The following screen shows motion recording after motion detection. A motion is deteced in the Channel 1. The ‘M’ mark before the title of each channel indicates that a motion is detected.

  • Page 48: System Setup

    System Setup (1) PASSWORD The default password : 4321 You can set the password to limit access to the Main Screen setup by unauthorized people. (Create a four-digit password by choosing between 1~4.) You can enter the password from No. 1 to No. 4 using the corresponding channel key. Once the password is entered, you’ll see the following message that asks if you want to change the password.
  • Page 49 SHR-1040/1040K USER’S MANUAL (3) RECORD LOCK If you set RECORD LOCK to ON and press STOP to release the current recording, you are prompted to enter the PASSWORD. (4) HDD ERASE If you exit the Menu after setting HDD ERASE to ON, you will see the following message that asks if you want to erase the data on the HDD.
  • Page 50 (6) SYSTEM ID Set the System ID to use the Remote Controller. When using more than one unit of the system, a number of systems may be operated at the same time with a single remote controller. Set the different IDs for different units. Press the System ID of the Remote Controller and use the number keys to create IDs.
  • Page 51 SHR-1040/1040K USER’S MANUAL Once the system switched to 1 channel mode, all system functions operate in 1 Channel mode and the items of other channels in the MENU are deactivated. Once the system switched to 1 channel mode, you can just play the data in this mode and the data recorded in 4 Channel mode could not be played.

  • Page 52: System Information

    System Information (1) HDD NO Displays HDD quantity that is installed on the system. (2) CAPACITY Displays the HDD capacity of the System. [Remaining Capacity/Entire HDD Capacity] (3) VERSION Displays the version of the System. 6-14 English English English...

  • Page 53: Chapter 7. Recording

    Chapter 7. Recording English...

  • Page 54: Basic Recording

    SHR-1040/1040K USER’S MANUAL SHR-1040/1040K USER’S MANUAL Basic Recording Press the Record button ( appears on the screen. The HDD LED blinks, indicating that data is being recorded to the HDD. Note Note You cannot record previously recorded data now being played back. To record the data, you must stop the playback of the data first.

  • Page 55: Motion Recording

    Motion Recording Start recording when a motion is detected in the channel and area set by the Alarm/Motion Record Setup menu. When the motion record begins, the M mark is displayed next to the channel, indicating recording is on. Note Note - To enable the motion detection, you have to set an area for each channel.

  • Page 56: Stop Recording

    SHR-1040/1040K USER’S MANUAL Stop Recording Click the Stop button to stop data recording. The REC mark disappears as follows, and recording is stopped. To stop data recording, click the STOP button. The REC mark disappears and the current recording stops as shown in the picture.

  • Page 57: Chapter 8. Search & Playback

    Chapter 8. Search & Playback English...

  • Page 58: Search Menu

    SHR-1040/1040K USER’S MANUAL SHR-1040/1040K USER’S MANUAL Search Menu Search Menu Press the Search button in Live mode to search recorded data. The following screen appears. Search is not enabled during recording. Stop recording to start search. - DATE & TIME SEARCH : Search recorded data based on the time and date. - RECORD EVENT SEARCH : Searches for all data recorded in Normal Record or Timer - ALARM EVENT SEARCH : Search all the data recorded in the Alarm/Motion mode.

  • Page 59: Date Time Search

    Date Time Search (1) DATE[YY/MM/DD] Set the date (year/month/day) you want to search. (2) TIME[HH:MM:SS] Set the time you want to search. (3) SEARCH START Enter the year/month/day/hour/minute/second you want to search. Press the Enter button ( Record Event Search The following screen appears when selecting the Record Event Search after pressing the Search button.

  • Page 60: Alarm Event Search

    SHR-1040/1040K USER’S MANUAL Alarm Event Search The following screen appears when selecting the Alarm Event Search after pressing the Search button. Displays the list of the data recorded in ALARM or MOTION RECORD out of all data on the HDD. Select from the Record Event List by using up/down left/right buttons ( the Search button after selecting from the Alarm Event List to start search.

  • Page 61: Power Event List

    Power Event List Display the list of the time and date record of Power On/Off. You can view the list on the following page by using the up/down/left/right buttons ( Note Note Enter the Time Record Mode from the Menu screen, and set On/Off before setting the time and date of recording.
  • Page 62 SHR-1040/1040K USER’S MANUAL Note Note Enter the Timer Record Mode from the Menu screen, and set On/Off before setting the time and date of recording. You can also set the number of fields to be recorded per minute. When the system reaches the end of the HDD during playback or the end of the current data, the system will start playing back from the beginning of the first data on the HDD.

  • Page 63: Chapter 9. Appendix

    Chapter 9. Appendix English...

  • Page 64: Product Specification

    SHR-1040/1040K USER’S MANUAL SHR-1040/1040K USER’S MANUAL Product Specification 1) SHR-1040, SHR-1040K Block Video Display Resolution Audio Video REC/PB Speed Simplex/Duplex Video REC CH Number REC/Play Frame Advance /Searching Recording Capability Video Record Resolution Alarm/Motion Motion Detection Level Remocon Storage Power Camera Power Output Operation Temp.
  • Page 65 2) SOC-C120 : Standard Camera Model Name Broadcasting System Imaging Device Effective Pixels S Synchronization Resolution Signal Output S/N Ratio Minimum Scene Illumination Gamma Correction Lens Auto Exposure Audio I/O Connectors Operating Temperature Power Source Power Consumption Dimensions Weight SOC-C120 NTSC STANDARD 1/4”...
  • Page 66 Operating Humidity Physical Size Weight English SOC-N120 IR LED Day &Night Vision Camera Voltage DC 12V from Equipment(DIY Monitor or DVR ) NTSC Standard Color Camera 1/4 inch IT S-HAD CCD 510(H)x492(V) 525lines 2 : 1 Interlace Horizontal : 15,734Hz...

  • Page 67: Recommended Hdd List

    Recommended HDD List MAKER SAMSUNG WesterN Digital Maxtor Seagate MODEL CAPACITY SV0802N 80GB SV1604E 160GB SV2041N 200GB WD1600JB 160GB WD2500JB 250GB 6L160PO 160GB 6L200PO 200GB 6L250RO 250GB ST3160212ACE 160GB Attached model in shipment ST3250823A 250GB REMARK English...

  • Page 68: Outline Drawing

    SHR-1040/1040K USER’S MANUAL Outline Drawing English...

This manual is also suitable for:

Shr-1040

Table of Contents