Event Monitoring - Samsung SDH-C74040 User Manual

live

EVENT MONITORING

This will display the channel in sync with a specific event (Motion/Tampering/Video Loss) if it occurs.
In "Monitor > Event Display", set the event monitoring to ON/OFF and specify the event display time. (Page 52)
• If multiple events occur simultaneously, the screen will switch to a split mode.
- 2~4 events : 4-split mode
- 5~9 events : 9-split mode
- 10~16 events : 16-split mode
• If the second event occurs within the set time of <Event Display>, the first event will last until the second
one is terminated. (Page 52)
Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
CH1 Event occurrence CH2
CH1
CH3 CH4
CH4 CH2
CH1
Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first
event occurred in CH 1.
CH3 CH1
Event occurrence
CH1
CH1 CH2
CH1
CH1
CH1
CH1
CH1
Press the [ALARM] button to reset the alarm settings and to release the event mode.
M
If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will be
performed.
In case of continuous events such as motion detection, switching to another split mode display may not immediate if
J
CH1 CH2
concatenating events follow, even when you stopped alarm of the event.
32_ live
5 seconds
CH2
CH1
Stop alarm
CH3
4 seconds
CH2
CH1
CH2
CH1
CH1
9 seconds
Stop alarm
CH2