Samsung SHR-4080P User Manual page 118

Caution
Caution
When Time Change, Load Factory Default, Network Change, System Shutdown, or
Hdd Format event occurs, Smart Viewer terminates automatically.
Screen Split Selection Button
- Small Sized Single / Single / Quad / Nine-Split Mode
- You may change the Split Mode of the screen under monitoring.
Sequence Mode Button
- Changes the channel to be played at the preset interval.
- The sequence time interval setup follows the procedure of Setup Mode
Setup.
- In Single Mode : 1 2
- In Quad Mode : 1,2,3,4
- In the event of connection with one SHR-4080P, this will not apply for Nine-Split
Mode.
Note
Note
If you connected with multi-DVRs(SHR-4080P) through a site, Sequence will operate
as follows.
- In Single Mode : DVR1:1CH
- In Quad Mode : DVR1:1,2,3,4CH
- In Nine-Split Mode : DVR1:1,2,3,4,5,6,7,8CH
3 4 5 6 7 8
5,6,7,8 1,2,3,4 (CH)
... DVR1:8CH DVR2:1CH
... DVR2:1,2,3,4CH
DVR2:1,2,3,4,5,6,7,8CH
Viewer
1 (CH)
... DVR1:1CH
... DVR1:1,2,3,4CH
...
10-18