Samsung SHR-4080P User Manual page 133

SHR-4080P USER'S MANUAL
10-33
Setup Item Selection Button
- This button is used for the selection of each Setup item.
- This is composed of 4 items, DVR Setup, Viewer Setup, Site Setup, and S/W
Version.
- DVR Setup: DVR Setup allows you to change the remote Menu setup items of
SHR-4080P.
- Viewer Setup: Viewer Setup allows you to set up various kinds of items concern-
ing operations of Smart Viewer.
- Site Setup: Site Setup allows you to set up SHR-4080P information, that is SHR-
4080P name, IP Address, ID, and Password that you contact through Smart
Viewer or register all the registered SHR-4080Ps at a site for control.
- S/W Version: S/W Version shows the current version of Smart Viewer, system
requirement, and the System S/W version of on-line SHR-4080P and upgrades
SHR-4080P System S/W remotely.
Save/Cancellation of Revised Information
- Click the [Apply] button to save the information revised in the Setup window click
the [Cancel] button to display the information before such a revision.
Closing Setup Window
- Click the [X] icon on the top right corner of the Setup window or the [Close]
button to close the Setup window.
- If more than one Setup item have been revised before you close the Setup
window, the following message box pops up. If you press OK, the revised
information will be saved, closing the Setup window but if you press CANCEL,
the revised information will be flown away, closing the Setup window.