Network - Samsung SHR-4080P User Manual

SHR-4080P USER'S MANUAL
8

Network

When the main body is connected to the network using high speed LAN, set to 1
Mbps or 2 Mbps. When the main body is connected to the network supporting low
bandwidth such as ADSL, set below 600 Kbps. If you set Bandwidth high though the
main body is connected to a slow network, the network load will get heavy therefore
the connection with Smart Viewer or video monitoring may be instable.
5-27
Connection Mode
Bandwidth
Admin Password
User Password
IP(Port)
Gateway
Subnet Mask
DNS
ADSL User ID
Password
Connection Mode
Designates the kind of the network connected to the main body of SHR-4080P.
Static IP : When the main body is connected to the network with Static IP.
Dynamic IP : When the main body is connected to the network with Dynamic IP
supplied by DHCP.
ADSL(PPPoE) : When the main body is connected to the ADSL network with PPPoE.
Bandwidth
Designates the network speed to which the main body of SHR-4080P is connected.
Unlimited / 2 Mbps / 1 Mbps / 600 Kbps / 300 Kbps
Caution
Caution
Admin Password
The password for the connection between Smart Viewer and the set with the authority
of Admin. The password can be as long as 8 digits.
Press "Enter" and the left number keys from 0 to 9 for setup.
User Password
The password for Smart Viewer's access to the set with the authority of general user.
IP (Port)
So sets up the IP Address and Port number as to connect the main body of SHR-4080P
with the network. If the Connection Mode is set to Static IP, you shall type in IP yourself.
If the connection mode is Dynamic IP or ADSL(PPPoE), the IP allocated by the DHCP
server or ADSL company will be automatically displayed. In case of failure of DHCP or
ADSL connection, 000.000.000.000 will be displayed. Then, press OK to retry connec-
tion to get a new IP. If you continue to fail in DHCP or ADSL connection, keep the main
body of SHR-4080P off for a while and turn it on for retry. The Port number indicates the
4 ports by which the main body attempts network connection. The default is 554, 555,
556, 557. You may change the Port number under circumstances. The Port number will
be altered in group of 4 consecutive numbers. If you allocate different Port numbers to
each main body and IP Router while you use IP Router to connect multi SHR-4080Ps,
you can compose a network through port forwarding.
Netwrok
Static IP
2 Mbps
*************
*************
192.168.001.201(554.555.556.557)
192.168.001.001
255.255.255.000
168.126.063.001
ID
*************