Spot-Out Monitoring - Samsung SHR-4080P User Manual

6

Spot-out Monitoring

Spot-out Monitoring has nothing to do with Live Screen Output, monitoring the full
screen of a certain channel. If you select Monitoring in the MENU screen, you can
make a channel among CH1 to CH8 spot out or you can output channels one by one
at an interval as Auto Sequence Mode of Live Mode. The interval is as same as the
forwarding time of Auto Sequence Mode of Live Mode. If you set Spot-out Event
Monitoring to On, you will be able to spot out the event channel. In case of simultane-
ous event occurrence at more than one channel, the lowest numbered event channel
has the first priority to be spotted out.
If the built-in HDD is not connected, or it operates with power applying in error,
(
At this time,
(1) Live screen mode
(2) Monitoring mode by Smart Viewer
operate only and the other functions including recording, search, playback, menu
setup, and PTZ do not operate.
If the above problem is occurred, Be sure to contact a service center to settle the
problem.
Caution
Caution
) indicating "built-in HDD error" is displayed at the top of left.
4-8