Connecting Ieee1394 Device - Samsung SHR-4080P User Manual

4

Connecting IEEE1394 Device

Connect the IEEE1394 hard disk through the back port of SHR-4080P.
You can connect up to 6 IEEE1394 armored hard disks by the Daisy-Chain
method.
After connection, Menu - System - HDD Setup is necessary for recognition and
setup for use.
The IEEE1394 Device hard disk shall be set to Master.
It acts as HOT PLUG to connect or disconnect the IEEE1394 device while the sys-
tem is running.
If you press Connect/Disconnect in Menu - System - HDD Setup, HOT PLUG will
be recognized or deleted.
Note
Note
See 5-8 System (HDD Setup) of User's Manual.
- Wait until the HOT PLUG connected hard disk is stabilized enough (approx. 2 sec-
onds per each hard disk) and click CONNECT in SHR-4080P MENU before use.
- Be sure to click DISCONNECT in SHR-4080P MENU to delete IEEE1394 Device
safely. Failure of clicking DISCONNECT may cause improper operation of IEEE1394
Device.
Caution
Caution
Caution
Caution
3-4