Event Monitoring - Samsung SRN-470D User Manual

CH3
CH1 CH2
CH6
CH5
CH9 CH3 CH4
CH7
5
7 CH19

evenT moniToring

CH2
CH13 CH1
19
CH2
13 CH1
This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.
In "monitor > event display", set the event monitoring to ON/OFF and specify the event display time. (Page 64)
• If multiple events occur simultaneously, the screen will switch to a split mode.
- 2~4 events : 4-split mode
- 5~9 events : 9-split mode
- 10~16 events : 16-split mode
CH3
• If the second event occurs within the set time of <event display>, the first event will last until the second one
CH1 CH2
3
is terminated.
CH6
CH1 CH2
Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
`
6 CH10 CH13
CH9 CH3 CH4
Event occurrence
9 CH3 CH4
CH12 CH15
CH1
Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first event
`
CH10 CH13
occurred in CH 1.
CH10 CH13
Event occurrence
CH12 CH15
CH12 CH15
CH1
CH1
`
M
`
`
J
`
`
CH1
CH1
CH14
5 seconds
CH16
Stop alarm
CH14
CH14
4 seconds초
CH16
CH16
Press the [ALARM] button to reset the alarm settings and to release the event mode.
If an alarm is output with the pre-event and post-event times specified together with the event recording settings, the event
recording will perform according to the specified recording type (pre event or post event).
In case of continuous events such as motion detection, switching to another split mode display may not immediate if
concatenating events follow, even when you stopped alarm of the event.
The video may be delayed depending on the network condition.
The event output can be delayed as the transfer of the alarm event from the network camera takes time.
CH1 CH2
CH1 CH2
CH1 CH2
9 seconds
Stop alarm
English _39