Event Monitoring - Samsung SDS-V4040 User Manual

evenT moniTorinG

This will display the channel in sync with a specific event (Motion/Video Loss) if it occurs.
In "monitor > event display", set the event monitoring to ON/OFF and specify the event display time. (Page 51)
• If multiple events occur simultaneously, the screen will switch to a split mode.
- 2~4 events : 4-split mode
- 5~9 events : 9-split mode
• If the second event occurs within the set time of <event display>, the first event will last until the second
one is terminated. (Page 51)
Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
`
Event occurrence
1
CH1
CH3
3
CH4
Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first
`
event occurred in CH 1.
CH3
Event occurrence
1
CH1 CH2
3
CH1
CH1
CH1
`
M
`
CH1 CH2
CH2
CH1
CH2
CH4 CH1
CH1
CH2
CH1 CH3
CH2
CH1
CH1
CH1
Press the [ALARM] button to reset the alarm settings and to release the event mode.
If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will be
performed.
5 seconds
CH1
Stop alarm
CH1
4 seconds
CH1 CH2
CH2
9 seconds
Stop alarm
English _33