Live Channel Selection And Audio On/Off Setup - Samsung SHR-4080P User Manual

SHR-4080P USER'S MANUAL
3

Live Channel Selection and Audio On/Off Setup

In other split modes than Full Screen Mode, 9 Split Mode, and Auto Sequence Mode,
you may choose a channel to be displayed in each split area on your own. Meanwhile,
the channel whose MENU is set to Audio On can set up Audio On/Off in all Live Modes.
Audio On/Off Setup in Full Screen
In Full Screen Mode, the selected channel Audio is automatically turned on and you
may set up Audio On/Off with the Audio Setup button [0 Button]. Depending on the
Audio On/Off setup condition, the Audio Setup button [0 LED] is turned on or off.
Audio On/Off Setup in 9 Split Mode
If you press [ENTER Button] in 9 Split Mode, the selection cursor in the following figure
will appear and the channel concerned will be selected. If you press the Audio Setup
button [0 Button] with a channel selected, you may set up Audio On/Off for the channel
concerned. Depending on the Audio On/Off setup condition, the Audio Setup button [0
LED] is turned on or off. You are not allowed to choose a channel in this mode.
Channel Selection and Audio On/Off Setup in 4,6,7,8 Split
Mode and PIP Mode
As in 9 Split Mode, the selection cursor will appear if you press [ENTER Button] in both
4,6,7,8 Split Mode and PIP Mode to select a channel. With a channel selected, you may
not also choose a channel on the current screen with the [CH1 ~ CH8] button but also
set up Audio On/Off with the Audio Setup button [ 0 ] as in 9 Split Mode. Depending on
the Audio On/Off setup condition, the Audio Setup button [ 0 ] is turned on or off.
Audio On/Off Setup in Auto Sequence Mode
The default of Auto Sequence Mode is set to Audio On and Audio changes channel by
channel. You may set up Audio On/Off with the Audio Setup button [0 Button] and the
Audio Setup button [0 LED ] is turned on or off depending on the Audio On/Off setup
condition.
4-5
CAM_02 CAM_03
CAM_01
CAM_06
CAM_04
CAM_05
CAM_07
CAM_08