Power Management Setup Page - MATSONIC MS9147C Series User Manual

Power Management Setup Page

This page sets some parameters for system power management
operation.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
ACPI Aware O/S
Power Management
Suspend Time Out
Hard Disk Time Out
Resume On RTC Alarm
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
LAN/Ring Power On
Keyboard Power On
Wake-Up Key
Wake-Up Password
This item supports ACPI (Advanced
ACPI Aware
Configuration and Power management
O/S
Interface). Use this item to enable or disable
the ACPI feature.
Use this item to enable or disable a power
Power
management scheme. If you enable power
Management
management, you can use the items below
to set the power management operation.
Both APM and ACPI are supported.
This sets the timeout for Suspend mode in
Suspend Time
minutes. If the time selected passes without
Out
any system activity, the computer will enter
power-saving Suspend mode.
This item sets up the timeout to power down
Hard Disk
the hard disk drive, if there is no hard disk
Time Out
activity after passing the preset period of
time.
3: BIOS Setup Utility
Yes
Enabled
Disabled
Standby
Disabled
15
12
30
30
ESC : Quit ↑↓←→ : Select Item
Disabled
F1 : Help PU/PD/+/ - : Modify
Disabled
Any key
F5 : Old Values (Shift)F2 : Color
N/A
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
31