Jumper Settings; Jp6 - Cmos Ram Clear Selector - MATSONIC MS6380SG User Manual

Hardware Configuration

Jumper Settings

JP6 - CMOS RAM Clear Selector

The battery on this mainboard is designed to retain the
system configuration in CMOS RAM. In order to save the
life of the battery, this jumper is set to "Clear CMOS"
position when this board is shipped, therefore you need to
set this jumper to "Normal" position before setting other
system configuration.
Description JP6
1
Clear CMOS
(while shipping)
1
Normal
1
JP6
Note: 1. Make sure this jumper is set to Normal mode before use.
2. Once you need to clear the CMOS, make sure your system
is truned off and the power core is unplugged.
9
I/O
Chipset
Chipset
1
JP6