MATSONIC MS7057CT Manual page 34

A G P
PC I
C NR
Note: Before installing an add-on card, check the docu-
mentation for the card carefully. If the card is not
Plug and Play, you may have to manually configure
the card before installation.
1. Remove a blanking plate from the system case corre-
sponding to the slot you are going to use.
2. Install the edge connector of the add-on card into the
expansion slot. Ensure that the edge connector is cor-
rectly seated in the slot.
Edge connector
3. Secure the metal bracket of the card to the system
case with a screw.
Note: For some add-on cards, for example graphics adapters
and network adapters, you have to install drivers and
software before you can begin using the add-on card.
C D 1
C D 2
1
A G P1
J3
P C I1
P C I2
P C I3
B AT1
P C I4
P C I5
P C I6
C N R1
29
D IM M 1 D IM M 2
JP 1
1 1 1 1 1 1 1 1
1 1 1 1
JP 2
1 1 1 1 W O L1 W O M 1
U S B2
1 1 1 1
J4