MATSONIC MS7057CT Manual page 54

On-Chip IDE Primary/Secondary PCI IDE (Enabled)
Use these items to enable or disable the PCI IDE channels
that are integrated on the mainboard.
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave de-
vice. These four items let you assign which kind of PIO
(Programmed Input/Output) is used by IDE devices. Choose
Auto to let the system auto detect which PIO mode is best, or
select a PIO mode from 0-4.
IDE Primary/Secondary Master/Slave UDMA (Auto)
Each IDE channel supports a master device and a slave de-
vice. This mainboard supports UltraDMA technology, which
provides faster access to IDE devices.
If you install a device that supports UltraDMA, change the ap-
propriate item on this list to Auto. You may have to install the
UltraDMA driver supplied with this mainboard in order to use
an UltraDMA device.
USB Controller (Enabled)
Enable this item if you plan to use the Universal Serial Bus
ports on this mainboard.
USB Keyboard Support (Disabled)
Enable this item if you plan to use a keyboard connected
through the USB port in a legacy operating system (such as
DOS) that does not support Plug and Play.
Init Display First (PCI Slot)
Use this item to specify whether your graphics adapter is in-
stalled in one of the PCI slots or is integrated on the
mainboard.
AC97 Audio (Auto)
Enables and disables the onboard audio chip. Disable this
item if you are going to install a PCI audio add-on card.
AC97 Modem (Auto)
Enables and disables the onboard modem support. Disable
this item if you are using an external modem or are going to
install a modem add-on card that doesn't support the AC 97
modem function.
49