MATSONIC MS7057CT Manual page 7

F e a t u r e s
F e a t u r e s
Processor
The MS7057CT mainboard uses a Socket 370 that
has the following features:
Accommodates the Intel Celeron 533A CPU
and Celeron CPUs at 566 MHz and above
Accommodates Intel Pentium III/Tualatin CPUs
that support a FSB of 100 or 133 MHz
Chipset
The Intel 815EP B-step chipset is based on an in-
novative and scaleable architecture with proven
reliability and performance. A few of the chipset's
advanced features are:
82815 Memory Controller Hub (MCH) built on
Intel Graphics Technology, featuring a back-
wards compatible unified graphics driver
82801BA I/O Controller Hub (ICH2) which de-
livers twice the I/O bandwidth as traditional
bridge architecture
Two USB controllers double the bandwidth to
24 Mbps across four ports
Integrated AC 97 audio that supports full sur-
round sound with up to 6 channels
An ATA 100 interface on the chipset, which
helps boost system performance by providing a
high-speed connection to ATA 100 Hard Disk
Drives, delivering maximum sustained data
transfer rates of 100 MB/sec
Additional key features include support for 4 USB
ports, an AC 97 link for audio and modem, hard-
ware monitoring, and ACPI/OnNow power
management.
Memory Supports SDRAM up to 512 MB, uses a 3 piece
3.3V unbuffered 168 pin socket, accommodates 3
double sided DIMMs at 100 MHz system memory
bus, also supports 2 double sided or 3 single sided
DIMMs at 133 MHz system memory bus
2