Hardware Requirements; Processor; Memory - MAXDATA PLATINUM 500 I M6 System Manual

Hardware Requirements

To avoid integration difficulties and possible board damage, your system must meet the requirements
outlined below.

Processor

One or two Dual-Core Intel

Memory

The server board provides four DIMM sockets across two channels, Channel A and Channel B. Channel
A consists of DIMM sockets A1 and A2. Channel B consists of DIMM sockets B1 and B2.
A minimum of one 512 MB DIMM is required in DIMM socket A1. DIMMs must be installed starting
with the lowest number slot in a given channel.
In non-mirrored mode, all DIMMs with the same slot number within a given branch must match (size,
technology, manufacturer). It is not required to match DIMMs between different slot numbers.
DIMMs must meet the following requirements:
• Use only Fully Buffered DIMMs (FBD) with DDR2 DRAM technology.
• Use only FBD DDR2-533 and FBD DDR2-667 stacked DIMM modules.
In determining your memory requirements, the need for memory sparing or memory mirroring must
be considered.
12
Xeon processor 5000 sequence.
® ®
Server Board Features