Hardware Requirements
To avoid integration difficulties and possible board damage, your system must meet the requirements
outlined below.
Processor
The mainboard supports one Intel
Power (TDP) with .5 GT/s.
Memory
The server board supports two memory channels with up to three DIMM sockets per channel. The
minimal memory population is one DIMM in memory slot DIMM_A1. Matching pairs of DIMMs
accross channels is recommended (e.g. DIMM_A - DIMM_B). Within a channel DIMM sockets
with a lower number must be populated before sockets with a higher number.
Supported Memory Modules
•
1.5 V DDR DIMMs, registered (RDIMMs) or unbuffered (UDIMMs)
•
Mixing of RDIMMs and UDIMMs is not permitted
•
The following DIMM and DRAM technologies are supported:
•
RDIMMs:
- Single, dual and quad rank
- x8 DRAM with Gbit technology
- DDR 1 (only single and dual rank), DDR 1066 and DDR 800
•
UDIMMs:
- Single and dual rank
- x8 DRAM with Gbit technology
- DDR 1, DDR 1066 and DDR 800
Optional Hardware
Remote Management Module
The Remote Management Module provides extended functions for server management.
A network card is provided specifically for remote access.
1
Xeon
400 series processor with up to 95 W Thermal Design
®
®
Server Features