Hardware Requirements; Memory - MAXDATA PLATINUM 400 IR User Manual

Hardware Requirements

To avoid integration difficulties and possible board damage, your system must meet the requirements
outlined below.

Memory

The Intel Server Board S3000AH provides four DIMM sockets across two banks. Bank 1 consists of
®
DIMM sockets 1A and 1B. Bank 2 consists of DIMM sockets 2A and 2B. Minimum memory operation
is a single 256MB DIMM in socket 1A. This will provide single-channel interleave. For dual-channel
interleave, two identical DIMMs are required in sockets 1A and 1B.
To operate in dual-channel dynamic paging mode, the following conditions must be met:
• Populate two identical DIMMs in sockets DIMM1A and DIMM 1B.
• Populate four identical DIMMs in each socket location.

Note
The use of three DIMMs is not supported. Use DIMMs that are the same type and speed. Use of
identical DIMMs is preferred.
DIMMs must meet the following requirements:
• Use only DIMMs with DDR2 DRAM technology.
• Use only DDR2-533 and DDR2-667 stacked DIMM modules.
MAXDATA PLATINUM 400 IR M7 MAXDATA PLATINUM 400 IR M7 13 13