Removing The Shipping Cover; Installing The Processor; Removing The Protective Socket Cover - MAXDATA PLATINUM 500 I M6 System Manual


Note
Do not touch the socket pins; they are very sensitive and easily damaged.
7. Take the processor out of the box and remove the protective shipping cover (see Figure 8).
8. Orient the processor with the socket so that the processor cutouts match the socket notches.
Install the processor as shown in Figure 9.

Note
Make sure the alignment triangle mark and the alignment triangle cutout align correctly.
9. Remove the protective socket cover (see Figure 10).
10. Lower the CPU load plate and lower the socket lever completely.

Note
Retain the protective socket cover for use when removing a processor that will not be replaced.
16 16
Figure 8. Removing the Shipping Cover
A
Figure 9. Installing the Processor
A
Figure 10. Removing the Protective Socket Cover
A
B
B
Server Board Installations and Upgrades Server Board Installations and Upgrades