Table of Contents
Advertisement
TG8411NZ(e).book Page 13 Thursday, March 26, 2009 3:27 PM
Temporarily switching
the display mode
You can select to display either a single
item or multiple items on one screen at a
time for the following features:
– menu list, phonebook list, caller list
and redial list
– handset top menu icons in function
menu
You can temporarily switch the display
mode as follows by pressing A shown
when viewing the lists or selecting menu
icons with:
– multiple entries/all menu icons are
shown on one screen at a time
– an entry/a menu icon is shown on one
screen in large characters at a time
Note:
L You can set the unit to always show
either single or multiple items
beforehand by selecting "Single
Item" or "Multi Items" as the
display mode setting (page 25).
L When in multiple items display mode,
you can switch the screen to confirm
the detailed information by pressing
A.
Getting Started
Handset top menu icons
The following icons are shown when you
press down on the centre of the joystick
in standby mode.
Icon
Feature
Caller List
j
[
<
Time Settings
K
Ringer Setup
[
J
Handset Setup
5
N
Base Unit Setup
!
"
#
$
Caller Barred
Screen saver mode
The backlight goes dark when on a
call or turns off completely after 1
minute of inactivity if the handset is not
on the base unit or charger.
Activate the handset display again by:
– pushing the joystick left {<} or right
{>} when on a call.
– pressing {ih} at all other times.
Turning the power
on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
13
Advertisement
Table of Contents
