Install The Handle - Hans Grohe II Installation Instructions / Warranty

English

Install the handle

Push the handle over the valve stem. Tighten the handle
screw using a 3 mm Allen wrench.
The handle screw must engage the slot milled into the
cartridge.
Install the handshower
Place a black rubber washer one end of the hose. Connect
this end to the handshower outlet on the panel.
Place the screen washer in the other end of the hose.
Connect it to the handshower.
Place the handshower in the handshower holder.
Adjust the slider
Use a .5 mm Allen wrench to adjust the tension on the
slider.
Turn the screw clockwise to make the slider easier to move.
Turn the screw counter-clockwise to make the slider harder
to move.
11