Table of Contents
Advertisement
Settings
Tones
Alert mode
You can set the ring, alert and alarm
tones via the Alert modes menu.
4
If you choose the 'Vibrate' or 'Vibrate then ring' option,
the vibrating option replaces all the alert and alarm
tones.
To modify the alert mode:
Press
. Select Settings.
1
2
Select Tones
3
Select Alert modes
Choose one of the available
4
settings
Vibrate, Vibrate & ring or
Vibrate then ring) and press
OK
to validate.
4
1. You can access the Alert modes menu directly from
the standby display by pressing
2. If the Alert mode is set to Silent the icon is dis-
played on the standby screen. If it is set to Vibrate or
Vibrate then ring the
3. When the phone is connected to either the Desk Top
Charger, HF kit, CLA or AC adaptor the vibrator mode
selection is temporarily inhibited and the phone rings
instead of vibrating.
Ring tone selection
You can choose a melody from the
available ring tones stored in the
phone but also from melodies you
have previously composed (see Com-
posed melodies, page34 ) or down-
loaded (see Downloaded melodies,
page33) and stored.
. Select Settings.
Press
1
2
Select Tones
3
Select Ringtones
Select
4
Incoming call L2 (if you
have a Line 2 subscription) or
Alarm
.
.
Silent,
(Ring,
.
icon is displayed.
.
.
Incoming
call,
.
5
Scroll up
or down
ten to the different ring tones.
Choose one by pressing
When scrolling up or down the select-
ed melody is played after a few sec-
onds.
Volume adjustments
The ring tone, key tones, conversation
and alarm tones (alarm clock and dia-
ry alarm) audio level can all be individ-
ually adjusted via the Settings menu:
. Select Settings.
Press
1
2
Select Tones
3
Select Volume
4
Select Ring, Ramping, Keys ,
Conversation or Alarm
5
Scroll up
adjust the settings.
You can also use the numeric
keys to set the required audio
level: pressing on
volume to 2, pressing on
or
sets the volume to 6 or
7 pressing on
ume to the minimum value (1
for the speech and 0 for all
others).
Press OK
6
setting.
7
Select Save
setting.
During a call you can adjust the con-
versation volume level by using the
and
keys.
4
1. If the ring tone volume level is set to 0 the icon
is displayed on the standby screen.
2. Setting the key tones to 0 deactivates the key
tones.
to lis-
.
.
.
.
or down
to
sets the
sets the vol-
to validate the
to store your
39
Advertisement
Table of Contents
