Table of Contents
Advertisement
Press
key (except
the alarm. The alarm icons re-
main on the display and the
alarm re-starts ringing 3minutes
later.
or
Press Valid.
knowledge and end the alarm
ringing.
If the phone is locked or if the PIN set-
ting is on, the phone returns to this
locked state after the alarm has rung
until you operate it.
If the alarm is acknowledged but not
validated the alarm indicators remain
on the display for up to 15 minutes (it
afterwards either goes back to its 'on'
or 'off' previous state).
1. If the Valid softkey is not pressed after the 3rd (and
4
final) alarm ringing the ringing is not repeated but
the phone remains on for 15 minutes. After those
15 minutes the phone reverts to its state before the
alarm sounded.
2. If a call is on at alarm time a 'Call in progress' alert
beep sounds and a visual alert is displayed every 3
minutes. Validate or acknowledge the alarm the
usual way.
To turn the alarm off:
1
Press
2
Select
3
Select
The Infrared port
The infrared port allows the exchange of
data between the mobile and other devic-
es (provided they have an infrared port).
Via the infrared port you can download or
send files such as images for your wallpa-
per (see Pictures, page31 ), send or re-
ceive name cards,...
To initiate a transfer via the infrared port,
your mobile must be placed facing anoth-
er infrared port before port opening.
Both ports can then be opened and syn-
chronised. The requested transfer can be
62
, or any other
No ring
) to stop
Valid.
Ok
or
. Select
.
Tools
.
Alarm clock
.
Off
performed. Objects (e.g name cards) are
transferred one by one.
Opening the infrared port
Opening the infrared port allows to
receive information via this port.
Once opened, the infrared port
can be used for any kind of trans-
to ac-
fer (data, fax, file transfer,...). The
infrared port is automatically
closed after a while.
To open the infrared port:
1
2
3
Closing the infrared port
Closing the infrared port closes all
infrared sessions.
To close the infrared port:
1
2
3
Transferring a name card via
the infrared port
You can transfer name via the in-
frared port:
1
2
3
4
. Select Tools.
Press
Select Infrared port
Select Open
. Confirmation
is displayed.
is displayed
on top of the standby display
to confirm the port opening.
. Select Tools.
Press
Select Infrared port
Select Close
.
Place your mobile opposite the
other device infrared port.
Open the other device infrared
port.
Select the card you wish to
transfer as explained in section
Viewing and calling phonebook
numbers, page14.
Select Options
.
Select Send by IrDA
infrared port is opened and the
transfer is then performed.
.
.
. The
Advertisement
Table of Contents
