Gsm Services - Mitsubishi Electric M330 User Manual

Dual band gsm telephone
Table of Contents

Advertisement

works. If the mobile succeeds attach-
ing a GPRS network,
standby mode. The mobile can then
send and receive voice calls and pack-
et data calls.
To set the mode of operations to
Standard:
Press
1
Select Connection
2
manager
Select Operation mode
3
Select Standard
4
• Modem mode
The mobile tries to reach a GPRS net-
work.
It can only receive GPRS data calls;
voice calls are then barred. This behav-
iour is the same whatever the network
capabilities.
However if the GPRS services are lost,
the mobile automatically returns to
the Standard operation mode.
To set the operation mode to Mo-
dem:
1
Press
2
Select Connection
manager
Select Operation mode
3
Select Modem
4

GSM Services

Diverting incoming calls
This Network dependent service al-
lows to divert incoming calls (voice,
fax or data calls) to another number
To divert a call:
Press
1
Select GSM Services
2
3
Select Call diverting
following sub-menu is dis-
played (n.b.: this menu con-
tents may vary according to
your service provider).
44
is displayed on
. Select Settings.
.
.
. Select Settings.
.
.
. Select Settings.
.
. The
Divert op-
tions
Always
When not
reachable
On no
reply
When
.
busy
All
conditions
Cancel all
All FAX
calls
All DATA
calls
4
5
6
7
.
4
1. If the 'On no reply' option is selected please enter
the time limit (5, 15 or 30 seconds; this also depends
on your network) after which the feature is valid.
2. Call diverts for both Line 1 and Line 2 have to be set
for each line. Only the selected line is affected by the
call divert.
To check the call divert status or deac-
tivate it:
1
2
3
4
Action
To divert all incoming voice
calls.
To divert all voice calls
when the phone cannot
be
reached
service).
To divert all voice calls when
the call is not answered to.
To divert all voice calls
when the line is engaged.
To divert all voice calls
when Not Reachable, No
Reply and When Busy.
To cancel all diverting
options.
To unconditionally divert
incoming fax calls.
To unconditionally divert
incoming data calls.
Select one of these options
and select OK
Select Activate
Select Voice Mail, Names or
Number
.
Enter the number the calls
have to be diverted to and
select OK
. A validation
message bearing the selected
number is displayed.
Press
. Select Settings.
Select GSM Services
Select the call diverting type
to
be
checked
cancelled
.
Select Status or Cancel
(out
of
.
.
or
.

Advertisement

Table of Contents
loading

Table of Contents