Alert Tones; Turning The Phone Off; Power Saver - Mitsubishi Electric M330 User Manual

Dual band gsm telephone
Table of Contents

Advertisement

network and/or service provider
name or logo are displayed to-
gether with the time and date,
the signal strength and the bat-
tery charge level. If the mobile
cannot find a valid network the
signal strength and the operator
name are not displayed.
The four arrows indicate features
can be reached via the four ar-
rows on the cursor key.
The oval symbol underneath the
arrows shows the Menu can be
reached by pressing on the
key (below the cursor key).
Wap and Message indicate you
can directly access the Wap™ and
Messages (SMS or MMS) services
by pressing on the
The features linked to the
softkeys in stand by mode depend
on your service provider. These
keys may not have been pro-
grammed. You can then program
them by pressing and holding
them, thus reaching a list of pro-
grammable
functions.
one by scrolling with the
keys, and validate by selecting
OK
.
is also displayed if your mobile
is connected to a GPRS network
Keypad lock
When activated the keypad lock
feature prevents accidental calls or
actions being made by while the
phone is carried in a pocket or a
bag for instance. Incoming calls
1.GPRS availability is operator dependent

Alert tones

Turning the phone off

4
softkeys.

Power saver

Choose
and
1
.
can however be received and an-
swered. When the call is over the
keypad lock is automatically reacti-
vated.
To activate the keypad lock:
Press and hold
displayed.
To deactivate the keypad lock:
Select Unlock
press
.
Press
to directly access the
Alert tones control (Ring, Silent,
Vibrate, Vibrate & ring, Vi-
brate then ring).
Press and hold
A tone sounds to confirm your ac-
tion. An animated screen is dis-
played while the mobile switches
off.
Do not take the battery out of the mobile without tur-
ning the phone off. Data might be lost. Should this
happen a first-aid kit symbol is displayed at next acti-
vation of the mobile.
To allow you to enjoy optimal use of
your mobile a power saver screen is
automatically displayed after one
minute when the phone is not be-
ing used. It displays your service
provider name and the time.
The power saver does not prevent
any operation. You can thus get a
call, an SMS, a MMS, a melody, an
image, etc. while the power saver is
on. The
symbol is displayed on
power saver mode instead of the
time when an event (message, file
in reception box, unanswered
call,...) has occurred on your mo-
bile. This symbol is displayed until
you have read all the new events.
Pressing any key allows return to an
active screen.
.
is
and
.
11

Advertisement

Table of Contents
loading

Table of Contents