Table of Contents
Advertisement
kit or to a headset. The phone then
automatically answers the call after
about 5 seconds (no key to be
pressed).
Press
1
Select Phone settings
2
3
Select Auto features
4
Select Auto-answer
choose On
5
Select Save
setting.
4
The auto-answer mode is not active if the mobile is set
to Silent.
Auto retry
This allows the phone to automatical-
ly redial the number after the call
failed due to an engaged line or an
unavailable signal from the network.
The number is re-dialled 10 times
maximum until it goes through.
Press
1
Select Phone settings
2
3
Select Auto features
4
Select Auto-retry
choose On
5
Select Save
setting.
When activated, Retrying and a
countdown timer are displayed before
each new trial. An auto-retry warning
tone sounds each time a new call at-
tempt is made.
Selecting Exit
during the retrial process cancels the
auto-retry process.
Auto Switch On/Off
This allows the phone to automatical-
ly switch on or off at pre-determined
times.
Press
1
Select Phone settings
2
3
Select Auto features
4
Select
Auto-switch-off and select
On to activate the feature.
42
. Select Settings.
.
.
and
.
to store your
. Select Settings.
.
.
and
.
to store your
or pressing any key
. Select Settings.
.
.
Auto-switch-on
5
Enter the time you want your
mobile to switch on and/or to
switch off and press OK
6
Select Save
setting.
If the phone is already on at automatic
switch-on time it remains on.
When the phone is about to automat-
ically switch off a warning message
and a countdown timer are displayed.
Selecting Exit
off process.
If the mobile is already off at switch-
off it remains off.
4
If a call is in progress at switch-off time, the switch-off
process is postponed until the call is ended.
Caution - Remember to turn off
the Auto switch-on feature when
boarding an aircraft.
See the General safety warnings.
Default settings
You can reset your phone and get
back your mobile default settings via
the Settings menu. This has no effect
on the phonebook entries or the
phone lock code.
1
Press
Select Phone settings
2
3
Select Default settings
The following features are reset:
Feature
Alert Modes
Volumes,
Ring, Key,
Speech,
Alarm.
Backlight,
Contrast
Any Key,
Auto-Retry,
Auto An-
swer fea-
tures.
or
Ramping
Graphics
Themes
.
to store your
cancels the switch
. Select Settings.
.
Default setting
Ring
Mid value
Mid value
Off
Off
Mitsubishi
Advertisement
Table of Contents
