Table of Contents
Advertisement
Setting of "ALARM SENS" ( default : "OFF" )
"ON" : When alarm terminal is activated, the DVR trans-
mits the status information to connected PC. E-mail is
sent to address displayed on "USER ADDRESS" of the
<E-MAIL ADDRESS> screen.
"OFF" : Does not transmit.
Setting of "REC MODE" ( default : "OFF" )
"ON" : Transmits the recording status such as normal
recording or alarm recording to connected PC. E-mail
is sent to address displayed on "USER ADDRESS" of
the <E-MAIL ADDRESS> screen.
OFF : Does not transmit.
Setting of "RETRY TIME" ( default : "10S" )
1S, 2S, • • • •, 10S, • • • • • • 59S, 60S
7. Turn the JOG dial to display the desired setting and turn the
SHUTTLE ring clockwise.
• The setting is confirmed and stops flashing.
8. Turn the SHUTTLE ring counterclockwise to return to the
<ETHERNET> screen, and press the SET UP button.
9. When the setting are changed, the unit turns off and on
automatically updating the new settings.
CAMERA CONTROL
Select camera type, protocol control, baud rate and ad-
dress of each camera connected.
The optional remote control R-2500 is required, press
display button on remote till PTZ is displayed for control.
Setting of "PTZ CONTROL"
"PELCO-2400" : PELCO "D"PROTOCOL 2400bps
"PELCO-4800" : PELCO "D"PROTOCOL 4800bps
"PELCO-9600" : PELCO "D"PROTOCOL 9600bps
"A.D." : American Dynamics RS-422/RS-485 protocol
4800bps
"OMIKRON" : OMIKRON protocol converter 192000bps
Setting of "ADDRESS" ( default : "001" )
"001", "002", • • • • • • • • • •, "127", "128"
Please set a "ADDRESS" setting as the same set-
ting as ADDRESS of a camera.
Please contact your sales agent for dealer.
1. Press the SET UP button } <SETTINGS> } Select
"CAMERA CONTROL" in the <INITIAL SET UP/
INFORMATION> screen and turn the SHUTTLE ring clockwise.
• The <CAMERA CONTROL> screen appears.
<CAMERA CONTROL> 1/2
<CAMERA CONTROL>
NO PTZ CONTROL
1
>>
2
3
4
5
6
7
8
9
NEXT PAGE
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ADDRESS
-----
001
-----
001
-----
001
-----
001
-----
001
-----
001
-----
001
-----
001
-----
001
<CAMERA CONTROL> 2/2
<CAMERA CONTROL>
NO PTZ CONTROL
10 10
>>
-----
11 11
-----
12 12
-----
13 13
-----
14 14
-----
15 15
-----
-----
16 16
INFORMATION/SERVICE
The <INFORMATION/SERVICE> screen is used to
check the warning log, device lists and initialization menu
after a power failure. The total operating time is displayed
on the 2/2 screen.
<INFORMATION/SERVICE> 1/2
<INFORMATION/SERVICE>
>>HDD INFORMATION
ARCHIVE/COPY INFORMATION
CFC INFORMATION
WARNING LOG LIST
RESET TO FACTORY SETTINGS
MAIN HDD DATA CLEAR
SUB HDD DATA CLEAR
CFC DATA CLEAR
ARCHIVE DATA CLEAR
COPY DATA CLEAR
<INFORMATION/SERVICE> 2/2
<INFORMATION/SERVICE>
ELAPSED TIME: SYSTEM
HDD SETTING
PARTITION SIZE
The <INFORMATION/SERVICE> screen consists
of 2 pages. The second page is displayed by turning
the JOG dial clockwise when the cursor points at the
setting of the bottom of the screen.
"ARCHIVE/COPY INFORMATION", "COPY DATA
CLEAR", and "ARCHIVE DATA CLEAR" appear on
page 1/2 of the <INFORMATION/SERVICE> screen
when "ARCHIVE•COPY" is selected on "ID4•ID5" of
the <INITIALIZATION> screen.
"ARCHIVE" and "COPY" operating time appear on
page 2/2 of the <INFORMATION/SERVICE> screen
when "ARCHIVE•COPY" is selected on "ID4•ID5" of
the <INITIALIZATION> screen.
"SUB HDD DATA CLEAR" appears on page 1/2 of
the <INFORMATION/SERVICE> screen when "PAR-
TITION" is selected on "HDD SETTING" of the <INI-
TIALIZATION> screen.
HDD INFORMATION/ARCHIVE/COPY
INFORMATION/CFC INFORMATION
This INFORMATION is used to check the connection
status of all internal and external peripheral recording
devices, and the amount of available apace (HDD, AR-
CHIVE/COPY/Compact Flash Card).
ADDRESS
001
001
001
001
001
001
001
(1/2)
(2/2)
3H
ARCHIVE 0H
COPY
0H
PARTITION
10%
61
61
Advertisement
Table of Contents
