Image Stabilizer Function; Fade In/Out Functions - Panasonic NV-GS50EN Operating Instructions Manual

2
Push the [W/T] Lever
[W] or towards [T] to zoom in or out.
W T
(39)
To Cancel the Digital Zoom Function
Set [CAMERA FUNCTIONS] >>
[CAMERA SETUP] >> [D.ZOOM] >>
[OFF].
≥For other notes concerning this item,
see .
-122-

Image Stabilizer Function

If the Movie Camera might be shaken
while recording, the camera shake in the
image can be corrected.
≥If the Movie Camera shakes too much,
this function may not be able to
stabilize images.
1
Set [CAMERA FUNCTIONS] >>
[CAMERA SETUP] >> [SIS] >> [ON].
(46) (38)
WB/SHUTTER/IRIS/
MF/VOL/JOG
≥The [[] Indication appears.
2
Press the Recording Start/Stop
(44)
Button or [PHOTO SHOT]
Button (26) to start recording.
(26)
PHOTO
SHOT
(44)
To Cancel Image Stabilizer
Set [CAMERA FUNCTIONS] >>
[CAMERA SETUP] >> [SIS] >> [OFF].
≥For other notes concerning this item,
see .
-122-
Camera Mode
(39)
towards
PUSH

Fade In/Out Functions

Fade In
Fade In brings out images and sounds
gradually from a black screen at the
beginning of a scene.
1
Keep pressing the [FADE] Button
(12) during the Recording Pause
Mode.
(12)
FADE
≥The image fades out gradually.
2
When the image is completely
gone, press the Recording
Start/Stop Button
recording.
(44)
3
Release the [FADE] Button
about 3 seconds after starting
recording.
≥The image reappears gradually.
Fade Out
Fade Out causes images and sounds to
disappear gradually, leaving a black
screen at the end of a scene.
1
Keep pressing the [FADE] Button
(12)
while recording.
(12)
FADE
≥The image fades out gradually.
-85-
(44)
to start
(12)