Image Stabilizer Function; Recording With The Video Light - Panasonic SDR-T76 Operating Instructions Manual

Image stabilizer function

Reduces the image shaking (jitter) due to
hand movement when recording.
¬ Change the mode to
Optical image stabilizer button
Pressing the button changes the
optical image stabilizer setting.


 OFF
: Active mode
This setting gives more stabilization and
is suitable for recording when walking.
: ON
This setting is suitable for recording in a
stable state such as scenery.
≥ Stabilization may not be possible under
strong shaking.
≥ When a tripod is used, we recommend
that you turn the image stabilizer off.
Recording with the video
light
The video light enables brightening of the
.
images taken in a dimly-lit place.
¬ Change the mode to
Light/Delete button [LIGHT/ ]
Each time the button is pressed, the
indication changes by one setting in the
following order.
Turns on/off automatically according to
brightness of the surroundings.
≥ Lights up when the lens cover is
closed.
≥ Auto video light will turn on/off in
conjunction with Low light mode in
Intelligent Auto Mode.
≥ When the motion picture video light is in
use, the recordable time when using the
battery is shortened.
≥ The subject should be within 1.2 m of the
unit.
≥ Using the colour night view function at the
same time will make conditions even
brighter.
≥ If you turn off the power or change the
mode, the video light is turned off.
# # Setting cancelled
/
: Always on.
/ :
.
LIGHT/
45
VQT3J03